Please cite your evidence for review.

Yeah, I am comparing linear distance to surface area, but if we call that 66 mile distance a diameter, were talking about roughly 3500 sq miles…which is a rounding error compared to the vastness of the south china sea.

The south china sea is longer than it is wide, but even at its narrowest width between Phillipines and Vietnam, it’s over 550 miles across. That’s just incomparable to the distance between Florida and Cuba. Anything between Florida and Cuba is figuratively parked right in USA’s backyard.

I legit tried to find the exact location of this latest aerial encounter between China fighter pilot and allied forces aircraft (because you’re right, that’s relevant) but couldn’t find it…the info must either be classified or intentionally censored.

There’s only 66 nautical miles of international water between FL and Cuba.

The South China Sea is 1.3 million square nautical miles.

You are a few orders of magnitude off for a rational comparison.

I don’t think they suck at forecasting…I think they are probably exceptional at forecasting but willfully lie about project costs when submitting bids for projects in order to come under the competition and win the contract. There doesn’t seem to be any penalties for this, so why would they stop?

Brandolini’s law, aka the “bullshit asymmetry principle” : the amount of energy needed to refute bullshit is an order of magnitude bigger than that needed to produce it.

Unfortunately, with the advent of large language models like ChatGPT, the quantity of bullshit being produced is accelerating and is already outpacing the ability to refute it.

Have you contacted the operator of the bot?

The L4sBot user bio lists how to get in contact with the handler @L3s@lemmy.world .

I would NEVER recommend a modern HP printer, but…I have a HP Laserjet 4000 (Circa 1997) that I ‘acquired’ from the company I worked for that went bankrupt.

This thing refuses to die. current impression count is over 500,000 prints. All its patents expired over a decade ago, and it’s still easy to find parts and toner (originals, and now even 3rd party knockoffs). It’s old enough now that modern generic drivers have built in support for it. The only parts I’ve ever had to replace are the rubber sheet feeder rollers which dry out and stop working correctly after 12-15 years.

So, I guess the point here is that some really solid printers were made a couple decades ago, back when manufacturers still took pride in their products, and they are old enough that the hardware is no longer protected by patents (so practically open) and robust driver support without all the bullshit. Picking up something from this era and cleaning it up would come close to satisfying a lot of your requirements.

Removed by mod

Removed by mod

Putting a Netflix show on DVD and selling it is absolutely illegal unless they have a distribution license provided by the copyright holder.

It would be legal after copyright expires (in the US, copyright exists for the lifespan of the author/creator + 70 years). Keep in mind that the US has stricter copyright laws than most of the rest of the world.

For other items, like physical functional items, reproductions are generally legal unless the item is patented. And it would still not be legal for the reproduction to also reproduce any registered names or trademarks associated with the original. Example: you could legally reproduce and sell knockoff Nike Air Jordans as long as you didn’t use the Nike swoosh or any likenesses of the copyrighted artwork. For items that are patented, or patent pending - making and selling reproductions is illegal - and for most patented items the reproduction doesn’t even have to be identical for it to be infringing, just replicating the functionality is probably infringing.

Removed by mod

There are no benefits to it now…unless you are part of the minority who exploits and benefits from it.

It comes across as if it was a business decision without regard for their customers…without the basic understanding that their customers ARE their business.

Some were produced that were claimed to be dimmable - and I wasted my money on a few and was still unhappy with them. The other problem I forgot to mention earlier was the startup time: the earlier bulbs (and the cheaper ones) wouldn’t just ‘turn on’ when the power was turned on…they took some time to start making light, and the colder it was the longer it took - this is an aspect where LEDs are amazing - maximum brightness within milliseconds of getting energized.

One problem is that CFL bulbs is that they contain small amounts of mercury (about 4mg per bulb). Because of that, disposing of them responsibly requires going through big hassles rather than just throwing them in the trash. Also, because of that mercury, accidentally breaking one means contamination of the environment around the break.

Flickering - always was a big problem for these things.

Longevity: They were very sensitive to heat, which meant that they loved to burn themselves up in a lot of applications.

Dimming: CFLs were NEVER good at being dimmable.

CFL was just a very poor technology detour on the way to the vastly superior LED lights.

Do you sanction all theft, or just theft of things you personally disapprove of?

I’m still rocking the v60 also. LG started packing a world class DAC into their smartphones back with the LG v35 and kept it going all the way to their pinnacle (the v60). The v35, the v60, and everything in between had audio superiority that still hasn’t been beaten by other modern flagships.

I’m going to be inconsolable when my v60 finally needs replacing.

Maybe I am in the minority but I’ll never need an aux jack again

There is still significant lag for bluetooth audio on both ios and android platforms. It’s doesn’t really impact calling, and it doesn’t really impact watching video content (because they figured out how to measure that latency in real time and inject artificial delay into the video stream so that audio and video sync). But what they haven’t figured out yet is the answer for bluetooth audio for gaming. When gaming, you can’t arbitrarily delay the video feed so that it lines up with audio, so the bluetooth audio experience is complete dogshit for any gaming scenario. If you game, you have to use the physical cable or the constant audio lag will drive you mad.

Also, there used to be (still are) a fair number of accessories designed to work through the aux port. Examples: mobile credit card readers that connect through aux jack (like square/paypal) that are used heavily by small vendors (especially for shows/events); also things like selfie sticks that use a cable plugged into the aux jack connected to a length of wire running inside the selfie stick to a button on the end of it.

The market is starting to come up with wireless versions of these things, but the modern wireless versions now require unique ios and android versions of them when the aux-jack solution used to be platform independent.

Also, the audio quality of an aux jack is an order of magnitude superior to anything that can be piped through bluetooth…still.

I very much appreciate devices still throwing traditional aux jacks onto mobile devices. Ideally, there will be a wireless technical solution that eventually is superior, but that technology is definitely not bluetooth and we’re still waiting for it to be invented and hit consumer availability.

I must be completely “dull witted” then. When I first started looking into lemmy, I went to the official “join-lemmy.org” website, clicked on “join a server” and picked one of the top listed recommended results. It just happened to be a VERY small and VERY new instance. But as a completely stupid dull witted new user who knew literally nothing about lemmy, I didn’t know any better.

After joining that instance and looking for communities on it, I only saw the local communities plus a few non local communities from larger instances and I legit thought that’s all there was on lemmy. I mean, it was clear I was seeing the local ones, and it was clear I was seeing some nonlocal ones, who why tf would I expect that I wasn’t seeing everything?

Your perspective is tainted by the fact that you know how it all works. People new to lemmy don’t, and I’m telling you that the onboarding and community discovery process is dogshit. I beg you to try considering things from the perspective of a newer user.

I tried mutualaidhub.org - and found another one that is about 45 miles from me so I went to their site to check it out. From what I can tell, it’s nothing more than a hyper-localized version of gofundme.com. It seems most of these things are just links to facebook groups. I don’t think these things are as organized or as helpful as your original post made them out to be.

Also, for the record, I’m not actually looking for assistance. I’ve honestly never heard of this thing until your post and just am trying to learn more about them, what they do, who and how they help, and maybe find something I could contribute. These things do not seem like a very viable alternative to traditional social services.